Zero Speed Switches

Phone: 813-262-0680 Send Email

Zero Speed Switch Sensor, Model ZS09P

ZS09P Specifications
Zero Speed Switch System consisting of Zero Speed Switch Sensor and Magnetic Disk.

The ZS09P Zero Speed Switch Sensor is a self-contained device that combines sensor and switch for use in over speed, under speed, and zero speed applications. It senses both magnetic and ferrous targets. Use the ZS09P Zero Speed Switch Sensor for switching control circuit loads or logic inputs (PLC, DCS, etc.).

Contact rating: 5 amp, 240 VAC

ZS09P Specifications
Zero Speed Switch Detailed Selection Guide

Technical Application Notes:
Conveyors in Aluminum Recycling Plant


Zero Speed Switch Sensor, Model ZS09R

ZS09R Specifications Smaller version of the ZS09P listed above. Use the ZS09R Zero Speed Switch Sensor for switching logic inputs (PLC, DCS, etc.), or a single "Ice Cube" Relay.

Contact rating: 1/4 amp pilot duty only

The ZS09R Zero Speed Switch Sensor replaces our popular ZS06 model, which has been obsoleted. The ZS09R is identical in appearance, size, and wiring to the ZS06, but superior in performance.

ZS09R Specifications
Zero Speed Switch Detailed Selection Guide

Technical Application Notes:
Conveyors in Construction Material Recycling Plant
Exhaust Fan in Industrial Plant


Motion Detector Module, Model ZS10

ZS10 Specifications The ZS10 Motion Detector Module is used in applications where a sensor is already in use, but the sensor cannot measure over speed, under speed or zero speed conditions. Use the ZS10 Motion Detector Module as an interface between sensor and control circuitry to enable over speed, under speed and zero speed measurement.

Simple On/Off Sensor + ZS10 Motion Detector Module = Zero Speed Switch

ZS10 Specifications
Zero Speed Switch Detailed Selection Guide

Technical Application Notes:
Coal Conveyors in High Temperature Environment in Power Plant


Top of page